KL type fin tube same as L fin tube,except that the base tube is knurled before application of the fin foot.Also named Wrap On Knurled type fin tube.After application,the fin foot is knurled into the corresponding knurling on the base tube thereby enhancing the bond between fin and tube,Resulting in improved heat transfer efficiency.
The fin is helically wound around the base tube forming a strong mechanical contact between the tube and fin,thus improving the heat transfer efficiency.This also give considerable corrosion protection to the base tube.
Maxumum working temperature:500 F (260 C)
Base tube material:
stainless steel, carbon steel, copper alloy,alloy steel (No theoretical limit)
ASME SA213/ASTM A213 TP304/304L TP316/TP316L TP321 TP310S TP317,
ASME SA106/ASTM A106 Gr B Gr C,ASME SA179/ASTM A179,ASME SA192/ASTM A192
ASTM B111 C70600 C44300 C68700 C71500...
Fin material: Aluminium,copper.
Stainless steel KL Type fins tube, carbon steel KL Type fins tube copper KL Type fins tube
Cu-Ni KL Type fins tube,Aluminium brass KL Type fins tube Copper-nickel KL Type fins tube Duplex KL Type fins tube super duplex KL Type fins tube Air cooler fins tube, Air pre-heater fins tube.
Extruded fins tube Serrated fin tubes L Type fins tube G Type fins tube LL Type fins tube H Type fins tube KL Type fins tube HFW fin tube laser welded fin tube.
Base pipe O.D:15.88-165mm
Fin height:6-50mm
Fin thickness:0.3-0.5mm
Fin pitch: as customer's request.
End:Plain Ends, Beveled Ends
No fin area on both side:As Customer's request.
Application:
Air Cooler fins,Charge Air Chiller, Condenser,Evaporator, Fluid Cooler, Gas Cooler,Oil Cooler, Radiator, Refrigeration,Steam to Air Heat Exchanger etc.
Package:
In bundles, plywood cases, wooden cases with water-proof package, etc.
High Frequency Welded fin tube also called solid type fin tube,use steel or stainless steel strip directly welded to tube surface by HFW.Can improving heat transfer efficiency much more than bare tube.Due to the tight welding of the fins to the base tube, these finned tubes are often used in vibrating conditions.Fin type have Serrated fin and flat fin.
L type fin tube, The fin is helically wound around the base tube forming a strong mechanical contact between the tube and fin, thus improving the heat transfer efficiency.Also named Wrap On fin tube. This also give considerable corrosion protection to the base tube.
LL fin tube Same as L fin except the fin foot is overlapped giving more corrosion protection. Also named Over Lapped fin tube. The fin is helically wound around the base tube forming a strong mechanical contact between the tube and fin, thus improving the heat transfer efficiency.This type of finned tube is often used as an alternative to the more expensive extruded type fin in corrosive environments.