The Difference Between National Standard Flange and Non-standard Flange
1. The national standard flange is a common part. The outer diameter, thickness and screw holes of the flanges of various specifications are fixed. The size is in accordance with the national standard HG/T20592-2009, JB/T81-94, etc. factor, so the safety margin for size and thickness is relatively large.
2. Non-standard flanges are some flanges designed by enterprises or individuals in order to save materials or obtain materials locally. Non-standard flanges will be designed to be smaller and thinner than national standard flanges to save materials, and the form of the sealing surface can also be changed, such as sealing with O-rings.
3. There are not many applications for non-standard flanges. For example, the working pressure of an equipment barrel flange is only 0.3MPa. If you think it is unnecessary to use a 0.6MPA national standard flange, you can design a small and thin non-standard flange yourself. But you must consider that the cost of your own design and processing is less than the material cost you save.
4. National standard flanges can be bought in the market, non-standard flanges must be designed and processed by yourself. Therefore, we can see that there are still many differences between national standard flanges and non-standard flanges, each of which is different, and the standards are different in all aspects.
The installation details of the specific stainless steel flanges are as follows:
1. When the flange is tightened, its tightening force should be kept in the same direction, and the compression of the rubber pad should be controlled at about one-third.
2.During the installation process of the flange, the sealing surface should be kept flat and clean. When there is oil or rust, they should be cleaned up to prevent the sealing performance of the flange from being affected. When installing stainless steel flanges, we should pay more attention to the details of the above aspects.